ISO 15156-1:2020

Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials
Autor: ISO
Código ICS: 75.180.01
Vigente
$94.010

Alcance

This document describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards, or regulations.This document addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking, and galvanically induced hydrogen stress cracking.Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions.This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see Clause 5.This document is not necessarily applicable to equipment used in refining or downstream processes and equipment.

Especificaciones de la Norma
Fecha de Publicación 17/11/2020
Título Secundario Industries du pétrole et du gaz naturel -- Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz -- Partie 1: Principes généraux pour le choix des matériaux résistant à la fissuration
Páginas Técnicas 11
Idioma Inglés