ISO 28927-13:2022

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 13: Fastener driving tools
Autor: ISO
Códigos ICS: 13.160 ; 25.140.10


This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.

Especificaciones de la Norma
Fecha de Publicación 11/02/2022
Título Secundario Machines à moteur portatives — Mesurage des vibrations au niveau des poignées — Partie 13: Machines à enfoncer les fixations
Páginas Técnicas 21
Idioma Inglés